It is an extremely robust machine and meets the highest requirements for cutting performance. The SSF 630 is suitable for cutting a wide range of materials. Saw blade dimensions from 6 to 27 mm are possible.
|Voltage||400 Volt/50 Hertz|
|(other voltage against extra cost)|
|Cutting speed range transmission||27 – 142 und 410 – 2200 m/min|
|Cutting speed range flange bearing||500 – 2000 m/min|
|Wheel diameter||630 mm|
|Table size||740 × 785 mm|
|Table height||1125 mm|
|Max. table payload||250 kg|
|Cutting width||605 mm|
|Cutting height||460 mm|
|Motor power|| 5,5 kW
1500 × 1/min
|Dimensions||1820 x 970 x 2550 mm (L x W x H)|
|Net weight approx.||1750 kg|
Optional equipment SSF 630
Butt welder EBS for sawblades, incl. shear and grinding motor.
Available EBS types:
Electronic annealing function for welding unit
Electronic annealing function for continuous setting of the annealing voltage for convenient treatment of the weld (for voltage until 400 Volt, 50 Hertz)
Special voltages for butt welder
Different voltages can be realised depending on the recipient country.
jaw guides with inserts
Bracket jaw guides bottom and top including carbide-tipped guide inserts for bracket jaw guides
Inserts for jaw guides
Carbide-tipped guide inserts for jaw guides
Roller guides inducing guide rollers used for curing speeds starting at 250 m/min.
1 set = 2 pieces with rim, 2 pieces without rim
Guide dimensions depending on the saw band used
Additional foot switch on the lower part of the machine for emergency stop.
Magnetic brake upper wheel
Automatic braking of the upper wheel by magnetic brake, in case of loss of tension or saw blade breakage.
Straight cutting device
(not available with feed table)
The straight cutting device is placed on the worktable with 4 pins. The feed is manual. By means of a mitre-adjustable feed angle and an adjustable cross-cut fence, cuts can be made at an angle of up to 45° and in lengths of up to 230 mm. The cutting depth can also be limited with another adjustable stop.
Parallel ledder consisting of:
Type SSF 420
up to 290mm
Type SSF 520/SSF 630/SSF 1600
up to 390mm
Type SSF 801
up to 550mm
Workpiece holder for safe and exact guiding of the workpiece.
Cutting support device
The cutting support device is used to cut thin sheets with thickness up to approx. 6 mm. The small contact surface prevents the sheet from vibrating and thus reduces the risk of saw blade teeth breaking.
Alignment with laser
For exact positioning a laser beam projects a laser beam on the surface of the workpiece. This beam points out the cutting channel.
Used laser: Helium-neon-laser with a prefixed lineoptic, not dangerous for the eye (corneal reflex).
LED lamp for lighting of the working area.
If an electric feed table is selected, the SSF 420 band saw machine is supplied incl. manual band tensioning device with hydraulic display. From size SSF 520 onwards, this device is serially included in the band saw.
Feed way / Table sizes:
Tables in other sizes can be quoted on request.
Manual feed table SSF 420, with lead screw
Electric feed table SSF 420
The desired feed length is entered via keyboard. The actual value is shown on the digital display. A resolver is used for electronic routing. The feed movement is switched off automatically when the pre-set measurements are reached. A maximum of 10 programs with 10 lines each can be stored.
Minimum spray device
Lubrication of the saw band by a minimum spray device.
– 1 spray head
– Pressure container for 1 l content
Hydraulic sawblade tension
Blowing off device
Blowing off chips at the sawblade. Pressure air provided by customer.
Connection piece for suction
Suction of chips at two points: lower sawblade guidance and lower wheel-box. Joined to 1 suction point for connection to suction system (by customer).
Special voltage band saw
adapted to the respective country of destination
Swivelling control panel
(included in type SSF 1600)
Control panel with two pivotal points:
The most important operating keys are integrated in the control panel. The main switch remains in the control cabinet. Height of bottom edge operator’s panel 1400 mm.
Increased throat of height by 250 mm
(Suitable for SSF 420, 520, 630, for SSF 801 on request)
Suction of dust, chips, granulate and fibres
Band saw in reinforced design
Aluminium wheel with vulcanised hard rubber coating
Credit notes are issued for returned used wheels that are in usable condition
We offer you saw bands in a wide range of designs and for varies application areas whether in
Saw band dimensions from 6 – 27 mm are possible. We will be happy to advise you and together we will find the suitable saw band for your application.
Special high-performance lubricant
Our lubricants fulfil all legal framework conditions and ensure a long service life and surface quality. The lubricants are suitable for machining high-strength steel materials, aluminium and AL alloys as well as non-ferrous metals.
Available in different package sizes
Your contact for Mössner bandsaws